Modulowo® Explore™ E dla Intel® Edison

MOD-76
5 Dec 2015

MOD-76 Modulowo® Explore™ E dla Intel® Edison

/
Posted By
/
Comments0
/

Description

       Modulowo® Explore™ E is the development kit, breakout board for Intel® Edison Compute Module (with dual-core Intel® Atom™, Wi-Fi and Bluetooth LE), designed for easy development of Internet of Things projects (IoT), compatible with Arduino*, Linux, C, C ++, Python, and JavaScript.

Board enables easy extension of compute module with additional modules, such as sensors, touch switches, motor controllers and LED drivers, communication modules, GPS and much more. Modulowo® Explore™ E  can be used to learn programming, education, prototyping and production of new solutions.

Modulowo® Explore E™ includes a connector for Intel® Edison platform, two Modulowo® duoNECT™ connectors for expansion modules – Modulowo® Explore™, GPIO, SPI, UART and I2C interfaces connectors, two micro USB (USB OTG and USB/UART converter), 12-bit Analog-to-digital converter (optional 16-bit) for measuring analog signals, voltage logic level translators (tolerates +3,3V/+5V signals), battery charger (only for Intel ® Edison) and connector for additional power supply for expansion modules.

Note! V_SEL +3.3V/+5V jumper to select of supply voltage and digital signals. Standard setting is + 3.3V.

Specification

• connector for Intel® Edison, characterized by:
– Dual-core Intel® Atom
– Single-core microcontroller
– WiFi*
– Bluetooth* Low-Energy (BLE) 4.0
– RAM 1 GB
– 4GB flash memory
• two connectors Modulowo® DuoNectTM for expansion modules
• 16 GPIO pins (2.54 mm pitch)
• additional connectors communication interfaces (2.54 mm pitch)
– 4 x I2C
– 1 x UART
– 1 x SPI
• 2 micro USB connector, including USB OTG
• 4 analog channels of 12-bit (supported by the ADS1015 ADC with I2C address SMD jumper)
• logic level jumper +3.3V/+5V
• power from the micro USB connector
• Battery Charger (Li-Ion, Li-Polymer) only for Intel® Edison, MCP73831
• USB/UART converter for serial communication with compute module
• translators of logic levels + 3.3V/+5V
• +3.3V 500mA voltage regulator for expansion modules
• pin current limit: 10 mA each
• dimensions: ~ 88.5 mm x 60.0 mm
RoHS

Modulowo® DuoNect™ Solution

  • pinout standard and constant width
  • adapters for development platforms: Arduino, Raspberry Pi, Intel Edison, STM32 Nucleo, Atmel Xplained, TI LaunchPad, Freescale Freedom and other, full list: modulowo.com/explore
  • +3,3V/+5V signals tolerant
  • castellated edges or pin connector
  • compatible with breadboard
  • more: modulowo.com/duonect

duonect example_01

Download / Documents